Serving Our Customers Since 1994 
Please let us know if you need anything that you don't find here. We are growing but as always, we have time to help those that are the reason we are here to start with.... Our Customers! It is our goal to always have time to lend that helping hand to those that need our experience and knowledge. To each of our customers, we extend ...a special THANK YOU for your continued support.
ORDER RIGHT HERE... RIGHT NOW.
We average shipping 95% of the orders received before 3:00 p.m on the same day. Look for FREE SHIPPING deals on several of our product pages.
We Are A Licensed MAXNC Dealer & Stock Every Machine & Accessory That MAXNC Makes. MADE IN THE USA!
SELF CENTERING 3 JAW CHUCK
This 3 jaw chuck fits on the rotary axis. It can as well be mounted flat onto the mill table and be used to hold material. The chuck has replaceable soft jaws so they can be machined to hold odd shaped material. This chuck works on the T2 Lathe as well. 3/4-16 Threaded Mount. Buy It Now.... Only $63.99
SELF CENTERING 4 JAW CHUCK
This is a 4 jaw synchronized ...or, self centering chuck that works well with the t2 lathe or the 4th axis. Nice to have when holding materials that are not round. Get One! .... Only... $72.99
CIRCULAR SOFT JAW SET
Made of aluminum, this specialty set of jaws can be milled for special projects or used as they are. These work well for reverse-holding specialty parts too. Order Now... Only.... $8.99
SOFT JAW SET
These soft jaws can be milled for holding odd shaped, hard to hold objects. Or, they can simply be used to replace original jaws. Buy Now! ..... Only.... $8.99
HEAVY DUTY VISE
This steel milling vise is perfect for any desktop mill or even drill press work.
The side slots make it very easy to use clamps to hold the vise onto the machine.
Vise Dimensions: Opens to 2-3/16",
Jaw Depth is 15/16". The Jaw Width is 2-3/8".
Total Height of the vise is 1-3/4". Total Body Length is 4-5/16"
long. Weight... 3 Lbs.
Just Right! Only..... $129.99
MAXNC 4th Axis
Adding the 4th Axis Rotary to your mill setup is actually adding another complete dimension to your milling capabilities.
The MAXNC 10 & 15 series mills will allow the use of the 4th axis simply by plugging it into the controller and adding the included software. Setup is easy and fast!
We also sell a plate that allows the unit to lay flat on the table making it a perfect horizontal indexing unit.
You can cut rings, chess pieces, about any model that requires milling to be done on every surface.
The unit will work in steps or continuous mode. Buy It Today For ONLY.... $585.00 Be sure to choose the correct 4th axis to match your machine... Open Loop or Closed Loop.
MAXNC COLLET SET
The MAXNC mills use these collets to hold the tool in the spindle.
A set of Seven..... The Sizes are: 1/8"...3/16"...1/4"...5/32"...7/32"...9/32...&...5/16"
ONLY.... $32.50
DRILL ARBOR
This piece attaches drill chucks and other accessories directly to your spindle.
Order Now Only.... $11.50
DRILL CHUCKS FOR THE MAXNC
Range.... 0 to .25". Or 0.0625" to 0.375".. Mounts On The Drill Arbor And Then To Your Spindle Nose..
Jacobs commercial grade chuck. These work very well for drilling on the desktop units and most any other use where a good drilling accuracy is required. Either Chuck For The Same Low Price...
Only....$14.95 Select Chuck Size Below
MAXNC LUBE KIT & INSTRUCTIONS
Always Ready To Ship!
We have been asked by so many "HOW ?" to lube and care for your Taig, Alignrite and Maxnc mills & lathes that we decided to offer this lube kit with simple & concise instructions on "HOW to lube, WHAT to lube & WHEN to lube your machines. This is the same lube & techniques we use here at DEARMOND TOOL on our machines. The kit will last a long time when used properly. ...And So Will Your Mill!
Get It Now!.... Only..... $19.95
If you don't find what you need here, please e-mail us or give us a call... we are glad to help.