MAXNC Accessories

MAXNC ACCESSORIES
	We Use These Machines In Our Shop On A Daily Basis As Well As Using Them To Teach CNC Milling And Techniques! We Know What They Will And Won't Do. Just Ask! E-MAIL US..... OR CALL.... (806) 381-8898
	Accessories For Your MAXNC & Other Mills Check Our Training Products For Demo And Training DVD's
	WE STOCK ONLY TOP OF THE LINE ACCESSORIES! BUY RIGHT FROM THIS PAGE USING OUR SECURE SHOP CART! WE CARRY ALL MAXNC ACCESSORIES ! View Shopping Cart Contents Go To Cart Check Out HEAVY DUTY STEEL MILLING VISE This steel milling vise is perfect for any desktop mill or even drill press work. The side slots make it very easy to use clamps to hold the vise onto the machine. Vise Dimensions: Opens to 2-3/16", Jaw Depth is 15/16". The Jaw Width is 2-3/8". Total Height of the vise is 1-3/4". Total Body Length is 4-5/16" long. Weight... 3 Lbs. Just Right! Only..... $109.95 Qty: MAXNC 4TH AXIS Adding the 4th Axis Rotary to your mill setup is actually adding another complete dimension to your milling capabilities. The MAXNC 10 & 15 series mills will allow the use of the 4th axis simply by plugging it into the controller and adding the included software. Setup is easy and fast! We also sell a plate that allows the unit to lay flat on the table making it a perfect horizontal indexing unit. You can cut rings, chess pieces, about any model that requires milling to be done on every surface. The unit will work in steps or continuous mode. Buy It Today For ONLY.... $485.00 Software Included! Qty: MAXNC COLLET SET The MAXNC mills use these collets to old the tool in the spindle. The Sizes are: 1/8"...3/16"...1/4"...5/32"...7/32"...9/32...&...5/16" ONLY.... $32.50 Qty: MAXNC DIGITIZER The Digitizer is one of the most popular accessories for the MAXNC mill. Copy in exacting detail, any existing model. The digitizer can be set up to digitize along the "X" or "Y" axis length. Using different settings, and stylus sizes, you can capture as much or as little detail as you like. The system draws what it is finding on the screen as it moves along gently over the model, while in the background it is writing the code required to cut the model when it is finished. Simply mount the Digitizer in the spindle, plug it in and start the included software package. A FUN and useful accessory to say the least. Buy It Right Here, Right Now For Only...... $325.00 Software Included! Select You're Machine.. We sell the digitizer for the router and the CL mills for the same price. Call for prices on the Digitizer for the Open Loop Series Mill. Qty: MAXNC TAILSTOCK KIT THIS ONE WORKS! Many times, when using the 4th axis, if the piece is long, it will need to be steadied on the far end from the chuck. This kit makes the tailstock precisely the proper height and allows for quick and easy setup when using the 4th axis rotary table in the vertical position. Works with the MAXNC 10 Or 15 Series Mills! T Nuts & Mounting Hardware Included! Buy It Now For Only... $129.00 Qty: MAXNC LUBE KIT & INSTRUCTIONS Always Ready To Ship! We have been asked by so many "HOW ?" to lube and care for your Taig, Alignrite and Maxnc mills & lathes that we decided to offer this lube kit with simple & concise instructions on "HOW to lube, WHAT to lube & WHEN to lube your machines. This is the same lube & techniques we use here at DEARMOND TOOL on our machines. The kit will last a long time when used properly. ...And So Will Your Mill! Get It Now!.... Only..... $19.95 Qty: View Shopping Cart Contents Go To Cart Check Out DRILL CHUCK FOR MAXNC Range.... 0 to .25". Or 0.0625" to 0.375".. Mounts On The Drill Arbor Listed Below. Jacobs commercial grade chuck. These work very well for drilling on the desktop units and most any other use where a good drilling accuracy is required. Either Chuck For The Same Low Price... Only....$14.95 (select chuck size below) Qty: MAXNC DRILL ARBOR This piece attaches drill chucks and other accessories directly to your spindle. Order Now Only.... $11.50 Qty: MAXNC 3 JAW CHUCK This chuck fits the T2 lathe and the 4th axis units. Using this makes a milling task much easier than trying to hold a part directly to the faceplate of the 4th axis. Buy Now! Only.... $59.99 Qty: MAXNC 4 JAW CHUCK This is a 4 jaw synchronized ...or, self centering chuck that works well with the t2 lathe or the 4th axis. Nice to have when holding materials that are not round. Get One! .... Only... $69.00 Qty: ALUMINUM SOFT JAWS FOR 3 JAW CHUCK These soft jaws can be milled for holding odd shaped, hard to hold objects. Or, they can simply be used to replace original jaws. Buy Now! ..... Only.... $13.50 Qty: CIRCULAR SOFT JAW SET FOR 3 JAW MAXNC CHUCK Made of aluminum, this specialty set of jaws can be milled for special projects or used as they are. These work well for reverse-holding specialty parts too. Order Now... Only.... $13.99 Qty: View Shopping Cart Contents Go To Cart Check Out BE SURE TO VISIT OUR "CLASS" WORK HOLDING PAGES AS WELL!!! WE CARRY EVERYTHING MAXNC MAKES...& MUCH MORE!! IF YOU DON'T SEE WHAT YOU WANT JUST CALL! (806) 381-8898 OR E-Mail Us!!