Serving Our Customers Since 1994

   We can add any of these accessories to your Levil mill, no matter which one you might already own or plan to purchase.

    

  Tool length sensor.
Measure the length of your tools automatically with just the click of a button. This saves hours of tool setup and assures a much more precise setting. Works perfectly with the Levil Software.
Only..... $499.00

   
  

Industrial Touch-screen display.
This 10.4" touch-screen display replaces the small net-book computer included with your machine for easier operation.
32GB solid-state drive
1GB RAM
Sun-readable
Only.... $1,990.00
This is the coolest accessory made!

4th Axis Rotary.
The 4th Axis accessory is a must for any jeweler or prototype maker. The 4th Axis opens up a world of new possibilities! Jewelers of course, need to make rings... but thousands of prototypes and other models require machining on all sides. This is truly the answer... and is heavy made to reduce any vibration.
Max Rotational Speed: 180 degrees/sec
Spindle Diameter: 60mm
Hole through spindle: 32mm
Standard Chuck: 3 Yaw, 4in (100mm)
Minimum increments: 0.001 degrees
Accuracy: 0.07degree
Positioning: +-0.01degree   Only... $2,500.00

 

Touch Sensor.
This accessory is crucial when digitizing contours in 3 planes and digitizing surfaces in 3D. The output file can be easily translated into .DXF, .NC format or Point Cloud for reverse engineering purposes. When you have an existing part or model, using this touch probe can save hours of drawing time and can yeild a more accurate size.
 Only...$500.00

Machine Enclosure.
This Lexan and Aluminumframe enclosure is a great way to assure machine safety and security. The over sized sliding doors allow easy access to the machine.   Only.... $1499.00

 

Tool Holders.
You will need extra tool holders for convenience and speed. Having tool holders pre-loaded with tools of different sizes speeds up the work in a busy shop.  Only....$149.00 each

Colombo Spindles.
Colombo makes some of the best spindles on the market. We suggest one of these two.

 

RC 73 Colombo +$1,100
Max speed: 36,000 RPM
Cooling by: Compressed air
Tool Clamped by: ER20 for 1/2" max shank diameter
Power: 3HP, 220/380V
Auto-tool-change: NO
Better for: Woods, Plastic, Aluminum, Steel

RC 73 ATC Colombo + $3,400
Max speed: 40,000 RPM
Cooling by: Compressed air
Tool Clamped by: ER20 for 1/2" max shank diameter
Power: 3HP, 220V/380V
Auto-tool-change: YES, 9 tools max (4 tool holders included)
Better for: Woods, Plastic, Aluminum, Steel

The Levil LV 16 ATC is standard on the machines. It allows for automatic tool changes and uses the industry standard ER-16 Collet system.

LV16 ATC Levil - $0 (Standard)
Max speed: 17,000
Cooling by: Compressed Air and/or Liquid cooled
Tool Clamped by: ER16 for 3/8" max shank diameter
Power: 2HP , 110V
Auto-tool-change: YES, 15 tools max (4 tool holders included)
Better for: Woods, Plastics, Wax